Dynamic cinematic to a structure 2r

Authors

  • Florian Ion Tiberiu Petrescu Polytechnic University of Bucharest
  • Relly Victoria Virgil Petrescu Polytechnic University of Bucharest

DOI:

https://doi.org/10.7198/geintec.v6i2.371

Abstract

Flat structures 2R can solve all the problems posed by all the robotic anthropomorphic structures. The study of the anthropomorphic robots by the use of a flat structure 2R is a much easier method than classical used spatial methods. The paper outlines a method for the determination of dynamic to a robotic structure 2R balanced. 2R plane structures are used in practice only in the form balanced, for which in this paper will be made, initial, the total balance, and then the study cinematico-dynamic will only develop on the model already balanced. Dynamic relations presented then briefly without deduction will be explained and discussed with regard to their application. On the basis of the model presented and following calculations performed can be chosen correctly the two electric motors in the actuator.

Author Biographies

Florian Ion Tiberiu Petrescu, Polytechnic University of Bucharest

Dr. Eng. Florian Ion Tiberiu Petrescu

Senior Lecturer at Bucharest Polytechnic University

Vice Presidend of Romanian Society of Robotics, Bucharest branch;

Vice Presidend of ARoTMM, Romanian Association for Theory of Mechanisms and Machines, Bucharest branch;

Member of Board of IFToMM, International Federation for Theory of Mechanisms and Machines;

Member of: AGIR, SRR, ARoTMM, IFToMM, SIAR, FISITA

Relly Victoria Virgil Petrescu, Polytechnic University of Bucharest

Dr. Eng. Relly Victoria Virgil Petrescu

Senior Lecturer at Bucharest Polytechnic University

Member of: AGIR, SRR, ARoTMM, IFToMM, SIAR, FISITA, SORGING

References

Nelson Diaz Aldana, César Leonardo Trujillo, José Guillermo Guarnizo, Active and reactive power flow regulation for a grid connected vsc based on fuzzy controllers, Revista Facultad de Ingeniería, No. 66 (2013), pp. 118-130, ISSN: 0120-6230. Available from:

http://aprendeenlinea.udea.edu.co/revistas/index.php/ingenieria/article/view/15229/13232.

Cao, W., Ding, H., Bin Zi and Ziming Chen (2013). New Structural Representation and Digital-Analysis Platform for Symmetrical Parallel Mechanisms, International Journal of Advanced Robotic Systems, Sumeet S Aphale (Ed.), ISBN: 1729-8806, InTech, DOI: 10.5772/56380. Available from:

http://www.intechopen.com/journals/international_journal_of_advanced_robotic_systems/new-structural-representation-and-digital-analysis-platform-for-symmetrical-parallel-mechanisms.

Dong, H., Giakoumidis, N., Figueroa, N., and Mavridis, N., (2013). Approaching Behaviour Monitor and Vibration Indication in Developing a General Moving Object Alarm System (GMOAS), International Journal of Advanced Robotic Systems, Hanafiah Yussof (Ed.), ISBN: 1729-8806, InTech, DOI: 10.5772/56586. Available from:

http://www.intechopen.com/journals/international_journal_of_advanced_robotic_systems/approaching-behaviour-monitor-and-vibration-indication-in-developing-a-general-moving-object-alarm-s.

Flavio de Melo, L., Reis Alves, S.F., Rosário, J.M., Mobile Robot Navigation Modelling, Control and Applications, in International Review on Modelling and Simulations, April 2012, Vol. 5, N. 2B, pp. 1059-1068. Available from:

http://www.praiseworthyprize.com/IREMOS-latest/IREMOS_vol_5_n_2.html.

Garcia, E.; Jimenez, M.A.; De Santos, P.G.; Armada, M., "The evolution of robotics research," Robotics & Automation Magazine, IEEE , vol.14, no.1, pp.90,103, March 2007. Available from:

http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=4141037&isnumber=4141014.

Garcia-Murillo, M., Gallardo-Alvarado, J., and Castillo-Castaneda, E., (2013). Finding the Generalized Forces of a Series-Parallel Manipulator, IJARS, Jaime Gallardo-Alvarado, Ramon Rodrıguez-Castro (Ed.), ISBN: 1729-8806, InTech, DOI: 10.5772/53824. Available from:

http://www.intechopen.com/journals/international_journal_of_advanced_robotic_systems/finding-the-generalized-forces-of-a-series-parallel-manipulator.

He, B., Wang, Z., Li, Q., Xie, H., and Shen, R., (2013). An Analytic Method for the Kinematics and Dynamics of a Multiple-Backbone Continuum Robot, IJARS, Patricia Melin (Ed.), ISBN: 1729-8806, InTech, DOI: 10.5772/54051. Available from:

http://www.intechopen.com/journals/international_journal_of_advanced_robotic_systems/an-analytic-method-for-the-kinematics-and-dynamics-of-a-multiple-backbone-continuum-robot.

Lee, B.J., (2013). Geometrical Derivation of Differential Kinematics to Calibrate Model Parameters of Flexible Manipulator, International Journal of Advanced Robotic Systems, Jaime Gallardo-Alvarado, Ramon Rodrıguez-Castro (Ed.), ISBN: 1729-8806, InTech, DOI: 10.5772/55592. Available from:

http://www.intechopen.com/journals/international_journal_of_advanced_robotic_systems/geometrical-derivation-of-differential-kinematics-to-calibrate-model-parameters-of-flexible-manipula.

Lin, W., Bing Li, Xiaojun Yang and Dan Zhang (2013). Modelling and Control of Inverse Dynamics for a 5-DOF Parallel Kinematic Polishing Machine, International Journal of Advanced Robotic Systems, Sumeet S Aphale (Ed.), ISBN: 1729-8806, InTech, DOI: 10.5772/54966. Available from:

http://www.intechopen.com/journals/international_journal_of_advanced_robotic_systems/modelling-and-control-of-inverse-dynamics-for-a-5-dof-parallel-kinematic-polishing-machine

Liu, H., Zhou, W., Lai, X., and Zhu, S., (2013). An Efficient Inverse Kinematic Algorithm for a PUMA560-Structured Robot Manipulator, IJARS, Jaime Gallardo-Alvarado, Ramon Rodrıguez-Castro (Ed.), ISBN: 1729-8806, InTech, DOI: 10.5772/56403. Available from:

http://www.intechopen.com/journals/international_journal_of_advanced_robotic_systems/an-efficient-inverse-kinematic-algorithm-for-a-puma560-structured-robot-manipulator.

Padula, F., and Perdereau, V., (2013). An On-Line Path Planner for Industrial Manipulators, International Journal of Advanced Robotic Systems, Antonio Visioli (Ed.), ISBN: 1729-8806, InTech, DOI: 10.5772/55063. Available from:

http://www.intechopen.com/journals/international_journal_of_advanced_robotic_systems/an-on-line-path-planner-for-industrial-manipulators.

Perumaal, S., and Jawahar, N., (2013). Automated Trajectory Planner of Industrial Robot for Pick-and-Place Task, IJARS, Antonio Visioli (Ed.), ISBN: 1729-8806, InTech, DOI: 10.5772/53940. Available from:

http://www.intechopen.com/journals/international_journal_of_advanced_robotic_systems/automated-trajectory-planner-of-industrial-robot-for-pick-and-place-task.

Petrescu, F.I., Petrescu, R.V., Cinematics of the 3R Dyad, in journal Engevista, vol. 15, No. 2, (2013), August 2013, ISSN 1415-7314, pp. 118-124. Available from:

http://www.uff.br/engevista/seer/index.php/engevista/article/view/376.

Petrescu, F.I., Petrescu, R.V., Kinematics of the Planar Quadrilateral Mechanism, in journal Engevista, vol. 14, No. 3, (2012), December 2012, ISSN 1415-7314, pp. 345-348. Available from:

http://www.uff.br/engevista/seer/index.php/engevista/article/view/377.

Petrescu, F.I., Petrescu, R.V., Mecatronica – Sisteme Seriale si Paralele, Create Space publisher, USA, March 2012, ISBN 978-1-4750-6613-5, 128 pages, Romanian edition.

Petrescu, F.I, Petrescu, R.V, Mechanical Systems, Serial and Parallel – Course (in romanian), LULU Publisher, London, UK, February 2011, 124 pages, ISBN 978-1-4466-0039-9, Romanian edition.

Petrescu, F.I., Grecu, B., Comanescu, A., Petrescu, R.V., Some Mechanical Design Elements. In the 3rd International Conference on Computational Mechanics and Virtual Engineering, COMEC 2009, Braşov, October 2009, ISBN 978-973-598-572-1, Edit. UTB, pp. 520-525.

Reddy, P., Shihabudheen K.V., Jacob, J., Precise Non Linear Modeling of Flexible Link Flexible Joint Manipulator, in International Review on Modelling and Simulations, June 2012, Vol. 5, N. 3B, pp. 1368-1374. Available from:

http://www.praiseworthyprize.com/IREMOS-latest/IREMOS_vol_5_n_3.html.

Tabaković, S., Milan Zeljković, Ratko Gatalo and Aleksandar Živković (2013). Program Suite for Conceptual Designing of Parallel Mechanism-Based Robots and Machine Tools, International Journal of Advanced Robotic Systems, Sumeet S Aphale (Ed.), ISBN: 1729-8806, InTech, DOI: 10.5772/56633. Available from:

http://www.intechopen.com/journals/international_journal_of_advanced_robotic_systems/program-suite-for-conceptual-designing-of-parallel-mechanism-based-robots-and-machine-tools

Tang, X., Sun, D., and Shao, Z., (2013). The Structure and Dimensional Design of a Reconfigurable PKM, IJARS, Sumeet S Aphale (Ed.), ISBN: 1729-8806, InTech, DOI: 10.5772/54696. Available from:

http://www.intechopen.com/journals/international_journal_of_advanced_robotic_systems/the-structure-and-dimensional-design-of-a-reconfigurable-pkm.

Tong, G., Gu, J., and Xie, W., (2013). Virtual Entity-Based Rapid Prototype for Design and Simulation of Humanoid Robots, International Journal of Advanced Robotic Systems, Guangming Xie (Ed.), ISBN: 1729-8806, InTech, DOI: 10.5772/55936. Available from:

http://www.intechopen.com/journals/international_journal_of_advanced_robotic_systems/virtual-entity-based-rapid-prototype-for-design-and-simulation-of-humanoid-robots.

Wang, K., Luo, M., Mei, T., Zhao, J., and Cao, Y., (2013). Dynamics Analysis of a Three-DOF Planar Serial-Parallel Mechanism for Active Dynamic Balancing with Respect to a Given Trajectory, International Journal of Advanced Robotic Systems, Sumeet S Aphale (Ed.), ISBN: 1729-8806, InTech, DOI: 10.5772/54201. Available from:

http://www.intechopen.com/journals/international_journal_of_advanced_robotic_systems/dynamics-analysis-of-a-three-dof-planar-serial-parallel-mechanism-for-active-dynamic-balancing-with-.

Wen, S., Zhu, J., Li, X., Rad, A., Chen, X., (2012). End-Point Contact Force Control with Quantitative Feedback Theory for Mobile Robots, IJARS, Houxiang Zhang, Shengyong Chen (Ed.), ISBN: 1729-8806, InTech, DOI: 10.5772/53742. Available from:

http://www.intechopen.com/journals/international_journal_of_advanced_robotic_systems/end-point-contact-force-control-with-quantitative-feedback-theory-for-mobile-robots.

Published

2016-06-14

Issue

Section

Engineering and Technology